| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| armrests and x braces http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5122 |
Page 1 of 1 |
| Author: | Robbie O'Brien [ Thu Feb 16, 2006 4:25 am ] |
| Post subject: | |
I was wondering if those who are doing armrests tuck the x brace through the armrest support or leave it short of the support. I will be veneering the armrest bevel later and imagine I could encounter problems if the x brace goes all the way through the support. |
|
| Author: | Josh H [ Thu Feb 16, 2006 4:39 am ] |
| Post subject: | |
I tuck the X into but not through the armrest support. Josh |
|
| Author: | Robbie O'Brien [ Thu Feb 16, 2006 8:30 am ] |
| Post subject: | |
Thanks Josh. That is kind of the idea I had but thought I would get some other opinions on it. I will tuck it in about 3 or 4mm and be done with it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|